Strong motor powers out the
grain. Light usage. Was in a pilot brewery for a year and then
used in a home brewery for the last 4 years.
Rated 15lbs per minute throughput.
With a stainless construction, 60lb
grain hopper with lid, fully adjustable hardened steel rollers, and explosion
proof motor this is the top-of-the-line grain mill for homebrewers and a great
choice for a nano brewery.
The all-stainless hopper holds a sack of malted grain. The included stainless
lid keeps dust down and keeps your hopper clean for your next batch. The mill
body itself is also made from stainless steel while the 2" diameter
rollers are made from hardened steel for longevity. The rollers adjust on both
sides providing for a consistent, even gap the length of the rollers. The
rollers are knurled in a pattern that we have found over the years to deliver a
great crush and consistent feed.
We use an explosion proof motor, found on commercial mills, because grain dust
can ignite if a regular electric motor was to emit a spark. It is a measure of
safety to give you and your family peace of mind. The switch on this unit
has been upgraded with a sturdy cover, to further diminish the chance of sparking.
The stainless stand allows for a six-gallon reception bucket to be slid under
to collect cracked grain. Since grain dust is to be avoided in a brewery we
make the bucket-to-stand fit perfectly tight to reduce dust in your brewery. A six-gallon
bucket will hold 25 pounds of grain, which we have found is a manageable size
to lift. For larger batches you can mill into one bucket, turn off the mill,
and continue milling into the next bucket.
- 60-pound capacity stainless
hopper with lid
- Stainless mill body
- 2" Fully Adjustable hardened
steel rollers (Gap range of 0.011 - 0.093 inches)
- Stainless stand
- 1/3 hp explosion proof motor with
- 110v Motor pulls 6.6 Amps
- 38"H x 27"L x 16"W
- 15 lbs. per minute throughput